UA Saddle

To connect a DN150/160mm OD lateral pipe into a large diameter twin wall or Weholite sewer or storage pipe.

PERFORMANCE

• Holds European Patent
• No need to excavate around the pipe and disturb the pipe bedding
• When correctly installed a Flexseal UA saddle will withstand 0.5 bar internal pressure.
• Withstands a vertical load of 1 tonne.
• WRc Approved - document PT/266/0707
• The construction materials ensure that the product is unaffected by normal ground conditions

	UA
INTERNAL DIAMETER OF MAIN PIPE	750-3000mm
WALL THICKNESS OF MAIN PIPE	40-120mm
DRILLED HOLE SIZE	177mm

This product can be used with all lateral pipe materials, but only in conjunction with a Flexseal coupling.

WALL THICKNESS OF MAIN PIPE

This product is suitable for wall thicknesses between 40mm and 120mm.
The product is assembled to suit the application.

For these saddles to function correctly the model chosen has to follow the pipe contour as closely as possible. Variations in wall thickness and pipe diameter can affect this.

For the correct selection to be made the following information is required.

• either the pipe brand / manufacturer and nominal diameter.
• or two of the following three dimensions; wall thickness, inside diameter, outside diameter.

Remember to order a suitable coupling to connect the lateral pipe.

Accreditations:

View LATERAL CONNECTIONS Case Studies >> click here >>