Shear Banded Couplings
Fernco, previously known as Flexseal, shear banded couplings are specifically designed to connect and repair pipes on adopted sewer and drainage applications, as required by the UK water companies. The stainless steel central band protects the joint under shear loads and helps to keep the joining pipes aligned, helping to prevent pipe displacement.
Bushes
Fernco, previously known as Flexseal, Bushes are simple rings of EPDM rubber that are available in various diameters and at various thicknesses. Bushes are used as an additional component part of either Shear Banded Couplings or Lateral Connection Saddles. The purpose of a bush is to increase the outside diameter of a pipe to be connected if the pipe is too small for the coupling being used or the saddle being used.
Icon Internal Couplings
Fernco, previously known as Flexseal, manufactures a wide range of couplings that connect rainwater and wastewater pipelines using the internal surface, we call these ‘Icon’ (internal connection) couplings.
Drain Couplings
Fernco, previously known as Flexseal, Drain Couplings, sometimes referred to as couplers, are simple, easy to use drainage pipe connectors. Drain Couplings are designed to connect two pipes with the same or similar (within 10mm) outside diameter.
Adaptor Couplings
Fernco, previously known as Flexseal, Adaptor Couplings, sometimes referred to as reducer couplings, are designed to connect unadopted drainage pipes with different outside diameters.
Chemical Couplings
Fernco, previously known as Flexseal, Chemical Couplings provide a flexible and watertight connection on underground drainage systems that require a high chemical resistance to a wide range of chemicals.
Wraparound Couplings
Fernco, previously known as Flexseal, Wraparound Couplings are designed to seal cracks in drainage pipes by simply wrapping around the cracked area and connecting. This eliminates the need to cut out and section of pipeline and replace with new.
End Caps
Fernco, previously known as Flexseal, EPDM End Caps are ideal for capping pipe ends, cleanouts and open test pipes. Suitable for both above and below ground applications, Flexseal end caps can be used on any pipe material.